Powering 800G-Ready HPC Data Centers
Transform your data center with 800Gbps Infiniband optical transceivers, active optical cables, active copper cables, direct attached copper cables, fiber patch cables, and patch panels designed for the 800G-ready data center.
White Paper: 800G and Beyond
Solutions Brief: Powering 800G-Ready Data Centers
White Paper: 800G and Beyond
Convergence and Opportunity
Tomorrow’s data centers require the very best connectivity solutions to support growing data transfer and compute demands. The convergence of 5G, IoT, AI, the cloud, augmented and virtual reality, and streaming solutions places massive demands on infrastructure, and falling shy of the ability to meet customer demand isn’t an option.
Our white paper, 800G and Beyond, explores the critical elements that growing data centers must consider before they transition to 800G.
INSIDE:
Get the T1Nexus Advantage
800G-ready data centers face the daunting challenge of identifying the right solution for their unique ecosystem with interoperability being a crucial aspect for transition to 800G capability in the most cost-efficient way.
T1Nexus provides end-to-end interconnect solutions including optical transceivers, active optical cables, active copper cables, direct attached copper cables, fiber patch cables, and patch panels designed for the 800G data center.
Our hands-on approach and supply of 800G optical transceivers with interoperable vendor-neutral solutions give customers the freedom and flexibility to run and maintain a multi-vendor, multi-standard solution.
800G-Ready Solutions for Tomorrow’s Data Centers
Examine detailed 800G transceiver product information
Learn about 800G compatible cabling solutions
See 800G transceiver uses cases
Read about how we helped leading data center solutions provider, Crusoe, transition to an 800G solution in record time
Key Products for HPC
Leverage the reliability and power of 800G transceivers and interoperable high-performance cabling solutions.
T1-OSFP-NDR-800G-SR8
The T1-OSFP-800G-SR8 is an 800Gb/s OSFP 800 SR8 optical module designed for 100m optical communication applications. The module converts 8 channels of 100Gb/s (PAM4) electrical input data to 8 channels of parallel optical signals, each capable of 100Gb/s operation for an aggregate data rate of 800Gbps.
On the receiver side, the module converts 8 channels of parallel optical signals of 100Gbps each channel for an aggregate data rate of 800Gbps into 8 channels of 100Gbps (PAM4) electrical output data.
An optical fiber cable with a dual MPO-12 connector can be plugged into the OSFP 800G SR8 module receptacle. Host FEC is required to support up to 100m fiber transmission.
Features
- Up to 106 Gbps data rate per channel by PAM4 modulation
- Support 800GAUI-8 electrical interface
- Integrated 850nm VCSEL array and PD array
- DDM function implemented
- Hot-pluggable
- 800Gb/s, 2x400Gb/s, 2xMPO-12
- Single +3.3V power supply
T1-OSFP-NDR-800G-DR8
The T1-OSFP-NDR-800G-DR8 is an 800Gbps OSFP 800 DR8 optical module designed for 500m optical communication applications. The module converts 8 channels of 100Gb/s (PAM4) electrical input data to 8 channels of parallel optical signals, each capable of 100Gbps operation for an aggregate data rate of 800Gbps.
On the receiver side, the module converts 8 channels of parallel optical signals of 100Gb/s each channel for an aggregate data rate of 800Gbps into 8 channels of 100Gb/s (PAM4) electrical output data. An optical fiber cable with dual MPO-12 connector can be plugged into the OSFP 800G SR8 module receptacle.
Features
- Up to 106 Gbps data rate per channel by PAM4 modulation
- Support 800GAUI-8 electrical interface
- Integrated 1310nm EML Laser
- DDM function implemented
- Hot-pluggable
- 800Gb/s, 2x400Gb/s, 2xMPO-12
- Single +3.3V power supply
Standards
- Compliant with IEEE 802.3cu-2021:
- 8x100GBASE-DR optical interface
- Compliant with IEEE P802.3ck D3.0: 8x100G AUI-1 C2M electrical interface
- Compliant with InfiniBand NDR
- Compliant with OSFP MSA HW Rev 4.1 Type 3 housing with Dual MPO-12 connector
- Compliant with CMIS Rev 5.0
- Case operating temperature 0°C to 70°C
- Two-wire serial Interface with digital diagnostic monitoring
- Complies with EU Directive 2011/65/EU (RoHS compliant)
- Class 1 Laser
T1-OSFP-NDR-400G-DR4
The module converts 4 channels of 100Gbps (PAM4) electrical input data to 4 channels of parallel optical signals, each capable of 100Gbps operation for an aggregate data rate of 400Gbps.
On the receiver side, the module converts four 100Gbps channels of parallel optical signals for an aggregate data rate of 400Gbps into four channels of 100Gbps(PAM4) electrical output data. An optical fiber cable with MPO-12 connector can be plugged into the OSFP 400G SR4 module receptacle.
Features
- Up to 106 Gbps data rate per channel by PAM4 modulation
- Support 400GAUI-8 electrical interface
- Integrated 1310nm EML Laser
- DDM function implemented
- Hot-pluggable
- 400Gb/s, MPO-12
- Single +3.3V power supply
T1-OSFP-NDR-400G-SR4
The T1-OSFP-NDR-400G-SR4 is a 400Gbps OSFP optical module designed for 50-meter optical communication applications. The module converts 4 channels of 100Gb/s (PAM4) electrical input data to 4 channels of parallel optical signals, each capable of 100Gbps operation for an aggregate data rate of 400Gbps.
On the receiver side, the module converts four 100Gbps channels of parallel optical signals for an aggregate data rate of 400Gbps into four channels of 100Gbps(PAM4) electrical output data.
An MPO-12 optical fiber cable can be plugged into the OSFP 400G SR4 module receptacle. Host FEC is required to support up to 50m fiber transmission.
Features
- Up to 106 Gbps data rate per channel by PAM4 modulation
- Support 400GAUI-4 electrical interface
- Integrated 850nm VCSEL array and PD array
- DDM function implemented
- Hot-pluggable
- Single +3.3V power supply
T1-QSFP-DD-400G-DR4
The T1-QSFP-DD-400G-DR4 is a 400Gb/s Quad Small Form Factor Pluggable-double density (QSFP-DD) optical module designed for 500m optical communication applications. The module converts 8 channels of 50Gb/s (PAM4) electrical input data to 4 channels of parallel optical signals, each capable of 100Gb/s operation for an aggregate data rate of 400Gb/s. Reversely, on the receiver side, the module converts 4 channels of parallel optical signals of 100Gb/s each channel for an aggregate data rate of 400Gb/s into 8 channels of 50Gb/s (PAM4) electrical output data.
An optical fiber cable with an MTP/MPO-12 connector can be plugged into the QSFP-DD DR4 module receptacle. Proper alignment is ensured by the guide pins inside the receptacle. The cable usually cannot be twisted for proper channel-to-channel alignment. Electrical connection is achieved through a QSFP-DD MSA-compliant edge-type connector.
The product is designed with form factor, optical/electrical connection, digital diagnostic interface according to the QSFP-DD Multi-Source Agreement (MSA) Type 2, and to meet the harshest external operating conditions including temperature, humidity, and EMI interference.
Features:
- QSFP-DD MSA compliant
- Parallel 4 optical lanes
- Compliant to IEEE 802.3bs Specficiation
- Up to 500m transmission on single mode fiber (SMF) with FEC
- Operating case temperature: 0 to 70°C
- 8×53.125Gb/s electrical interface (400GAUI-8)
- Data Rate 106.25Gbps (PAM4) per channel
- Maximum power consumption 12W
- MPO-12 connector
- RoHS compliant
T1-QSFP-DD-400G-DR4+
The T1-QSFP-DD-400G-DR4+ is a 400Gb/s Quad Small Form Factor Pluggable-double density (QSFP-DD) optical module designed for 2km optical communication applications. The module converts 8 channels of 50Gb/s (PAM4) electrical input data to 4 channels of parallel optical signals, each capable of 100Gb/s operation for an aggregate data rate of 400Gb/s. Reversely, on the receiver side, the module converts 4 channels of parallel optical signals of 100Gb/s each channel for an aggregate data rate of 400Gb/s into 8 channels of 50Gb/s (PAM4) electrical output data.
An optical fiber cable with an MTP/MPO-12 connector can be plugged into the QSFP-DD DR4+ module receptacle. Proper alignment is ensured by the guide pins inside the receptacle. The cable usually cannot be twisted for proper channel-to-channel alignment. Electrical connection is achieved through a QSFP-DD MSA-compliant edge-type connector. The product is designed with form factor, optical/electrical connection, digital diagnostic interface according to the QSFP-DD Multi-Source Agreement (MSA) Type 2, and to meet the harshest external operating conditions including temperature, humidity, and EMI interference.
Features:
- QSFP-DD MSA compliant
- Parallel 4 optical lanes
- Compliant to IEEE 802.3bs Specficiation
- Up to 2km transmission on single mode fiber (SMF) with FEC
- Operating case temperature: 0 to 70°C
- 8×53.125Gb/s electrical interface (400GAUI-8)
- Data Rate 106.25Gbps (PAM4) per channel
- Maximum power consumption 12W
- MPO-12 connector
- RoHS compliant
T1-QSFP-DD-400G-FR4
The T1-QSFP-DD-400G-FR4 is a 400Gb/s Quad Small Form Factor Pluggable-double density (QSFP-DD) optical module designed for 2km optical communication applications. The module converts 8 channels of 50Gb/s (PAM4) electrical input data to 4 channels of CWDM optical signals and multiplexes them into a single channel for 400Gb/s optical transmission. Reversely, on the receiver side, the module optically de-multiplexes a 400Gb/s optical input into 4 channels of CWDM optical signals and converts them to 8 channels of 50Gb/s (PAM4) electrical output data.
The central wavelengths of the 4 CWDM channels are 1271, 1291, 1311, and 1331 nm as members of the CWDM wavelength grid defined in ITU-T G.694.2. It contains a duplex LC connector for the optical interface and a 76-pin connector for the electrical interface. To minimize the optical dispersion in the long-haul system, single-mode fiber (SMF) has to be applied in this module. Host FEC is required to support up to 2km fiber transmission.
The product is designed with form factor, optical/electrical connection, digital diagnostic interface according to the QSFP-DD Multi-Source Agreement (MSA) Type 2, and to meet the harshest external operating conditions including temperature, humidity, and EMI interference.
Features:
- Compliant with 400G-FR4 Technical Specification rev 2.0 (100G Lambda MSA) and 400GBASE-FR4(IEEE802.3cu)
- Compliant with IEEE 802.3bs standard: 400GAUI-8 electrical interface
- Compliant with QSFP-DD MSA HW Rev 5.0
- Type 2 housing with duplex LC connector
- Compliant with QSFP-DD CMIS Rev 4.0
- Maximum power consumption 12 W
- Case operating temperature 0°C to 70°C
- Two-wire serial Interface with digital diagnostic monitoring
- Complies with EU Directive 2011/65/EU (RoHS compliant)
- Class 1 Laser
T1-QSFP-DD-400G-LR4
The T1-QSFP-DD-400G-FR4 is a 400Gb/s Quad Small Form Factor Pluggable-double density (QSFP-DD) optical module designed for 2km optical communication applications. The module converts 8 channels of 50Gb/s (PAM4) electrical input data to 4 channels of CWDM optical signals and multiplexes them into a single channel for 400Gb/s optical transmission.
Reversely, on the receiver side, the module optically de-multiplexes a 400Gb/s optical input into 4 channels of CWDM optical signals and converts them to 8 channels of 50Gb/s (PAM4) electrical output data. The central wavelengths of the 4 CWDM channels are 1271, 1291, 1311, and 1331 nm as members of the CWDM wavelength grid defined in ITU-T G.694.2.
It contains a duplex LC connector for the optical interface and a 76-pin connector for the electrical interface. To minimize the optical dispersion in the long-haul system, single-mode fiber (SMF) has to be applied in this module. Host FEC is required to support up to 2km fiber transmission.
The product is designed with form factor, optical/electrical connection, digital diagnostic interface according to the QSFP-DD Multi-Source Agreement (MSA) Type 2, and to meet the harshest external operating conditions including temperature, humidity, and EMI interference.
Features:
- QSFP-DD MSA compliant
- 4 CWDM lanes MUX/DEMUX design
- 100G Lambda MSA 100G-LR Specification compliant
- Up to 10km transmission on single mode fiber (SMF) with FEC
- Operating case temperature: 0 to 70°C
- 8×53.125Gb/s electrical interface (400GAUI-8)
- Data Rate 106.25Gbps (PAM4) per channel
- Maximum power consumption 12W
- Duplex LC connector
- RoHS compliant
T1-QSFP-DD-400G-SR-BD
The T1-QSFP-DD-400G-SR4-BD is a 400Gb/s Quad Small Form Factor Pluggable-double density (QSFP-DD) optical module that can support 400Gb/s bit rates. It is a parallel Quad Small Form-factor Pluggable—double density (QSFP-DD) Bi-Direction optical module. The module accepts eight host electrical data and transmits them in two groups of optical bi-directional lanes (each group contains 4 pairs of optical lanes) to allow optical communication over optical multi-mode fibers. Reversely, on the receiver side, the module accepts 8 sets of optical input signals and converts them to 8 channels of electrical data.
An optical fiber with an MPO-12 connector can be plugged into the QSFP-DD module receptacle. Proper alignment is ensured by the guide pins inside the receptacle. The cable usually cannot be twisted for proper channel-to-channel alignment. Electrical connection is achieved through an MSA- compliant 76-pin edge-type connector.
The module operates by a single +3.3V power supply. LVCMOS/LVTTL global control signals, such as Module Present, Reset, Interrupt, and Low Power Mode, are available with the modules. A 2-wire serial interface is available to send and receive more complex control signals, and to receive digital diagnostic information. Individual channels can be addressed and unused channels can be shut down for maximum design flexibility.
The product is designed with form factor, optical/electrical connection, digital diagnostic interface according to the QSFP28 Multi-Source Agreement (MSA), and to meet the harshest external operating conditions including temperature, humidity, and EMI interference. The module offers very high functionality and feature integration, accessible via a two-wire serial interface.
The central wavelengths of the 4 CWDM channels are 1271, 1291, 1311 and 1331 nm as members of the CWDM wavelength grid defined in ITU-T G.694.2. It contains a duplex LC connector for the optical interface and a 76-pin connector for the electrical interface. To minimize the optical dispersion in the long-haul system, single-mode fiber (SMF) has to be applied in this module. Host FEC is required to support up to 2km fiber transmission
The product is designed with form factor, optical/electrical connection and digital diagnostic interface according to the QSFP-DD Multi-Source Agreement (MSA) Type 2. It has been designed to meet the harshest external operating conditions including temperature, humidity and EMI interference.
Features:
- QSFP-DD MSA compliant
- 8×53.125Gb/s electrical interface (400GAUI-8)
- Up to 150m OM5 MMF transmission
- Operating case temperature 0°C to 70°C
- Single 3.3V power supply
- Maximum power consumption 12W
- MPO-12 optical connector
- RoHS-6 compliant
T1-QSFP-DD-400G-SR8
The T1-QSFP-DD-400G-SR8 is a parallel 400Gb/s Quad Small Form Factor Pluggable–double density (QSFP-DD) optical module that provides increased port density and total system cost savings. The QSFP-DD full-duplex optical module offers 8 independent transmit and receive channels, each capable of 53.125Gb/s operation for an aggregate data rate of 400Gb/s on 100 meters of OM3 multi-mode fiber.
An optical fiber cable with an MTP/MPO-16 connector can be plugged into the QSFP-DD SR8 module receptacle. Proper alignment is ensured by the guide pins inside the receptacle. The cable usually cannot be twisted for proper channel-to-channel alignment. Electrical connection is achieved through a QSFP-DD MSA-compliant edge-type connector. The central wavelengths of all 8 parallel lanes are 850nm.
It contains an optical MPO-16 connector for the optical interface and a 60-pin connector for the electrical interface. Host FEC is required to support up to 70m OM3 multi-mode fiber transmission. The product is designed with form factor, optical/electrical connection, digital diagnostic interface according to the QSFP-DD Multi-Source Agreement (MSA) Type 2, and to meet the harshest external operating conditions including temperature, humidity, and EMI interference.
Features:
- QSFP-DD MSA compliant
- 8 parallel lanes one 850nm center wavelength
- Compliant to IEEE 802.3bs Specficiation
- Up to 70m transmission on multi-mode fiber (MMF) OM3 with FEC
- Operating case temperature: 20 to 60°C
- 8×53.125Gb/s electrical interface (400GAUI-8)
- Data Rate 53.125Gbps (PAM4) per channel
- Maximum power consumption 10W
- MPO-16 connector
- RoHS compliant
T1-QSFP-DD-4X100G-LR
The T1-QSFP-DD-4X100G-LR is a 400Gb/s Quad Small Form Factor Pluggable-double density (QSFP-DD) optical module designed for 10km optical communication applications. The module converts 8 channels of 50Gb/s (PAM4) electrical input data to 4 channels of parallel optical signals, each capable of 100Gb/s operation for an aggregate data rate of 400Gb/s. Reversely, on the receiver side, the module converts 4 channels of parallel optical signals of 100Gb/s each channel for an aggregate data rate of 400Gb/s into 8 channels of 50Gb/s (PAM4) electrical output data.
An optical fiber cable with an MTP/MPO-12 connector can be plugged into the module receptacle. Proper alignment is ensured by the guide pins inside the receptacle. The cable usually cannot be twisted for proper channel-to-channel alignment. Electrical connection is achieved through a QSFP-DD MSA-compliant edge-type connector.
The product is designed with form factor, optical/electrical connection, digital diagnostic interface according to the QSFP-DD Multi-Source Agreement (MSA) Type 2. It has been designed to meet the harshest external operating conditions including temperature, humidity, and EMI interference.
Features:
- QSFP-DD MSA compliant
- 4 CWDM lanes MUX/DEMUX design
- 100G Lambda MSA 100G-LR Specification compliant
- Up to 10km transmission on single mode fiber (SMF) with FEC
- Operating case temperature: 0 to 70°C
- 8×53.125Gb/s electrical interface (400GAUI-8)
- Data Rate 106.25Gbps (PAM4) per channel
- Maximum power consumption 12W
- MPO-12 connector
- RoHS compliant
Active Optical Cables
OSFP 800G AOC is a high-speed optical data transmission cable assembly designed to deliver 800Gbps data rates. As an OSFP (Octal Small Form Factor Pluggable) form factor cable, it meets the compact and high-density standard for optical transceivers and cables.
OSFP AOC cables integrate active optical components, such as lasers and photodetectors, within the cable connectors to facilitate rapid and reliable data transmission over short to medium distances.
Commonly used in data center environments, OSFP cables support high-performance computing clusters, offering flexibility, low latency, and high bandwidth to support the demands of modern networking applications.
Direct Attach Cables
OSFP 800G DAC delivers high-speed, cost-effective interconnection technology meticulously engineered for ultra-rapid data transmission 800Gbps. OSFP 800G DAC meets OSFP (Octal Small Form Factor Pluggable) form factor standards and is distinguished by the use of copper conductors which are optimized for short-range connections within the densely populated and demanding environments of data centers.
Renowned for its reliability and energy efficiency, the OSFP 800G DAC cable provides seamless compatibility with a diverse range of networking equipment and caters to
applications by providing swift and uninterrupted data transfer for up to 3 meters.
Active Copper Cables
OSFP 800G ACC is a cutting-edge interconnection solution engineered to facilitate high-speed data transmission at 800Gbps. It meets the OSFP (Octal Small Form Factor Pluggable) form factor standard, harnessing the capabilities of active copper conductors specially optimized for short-range connections within the intricate infrastructure of data centers.
OSFP 800G ACC is configured with OSFP and available in a range of length options longer than DAC to accommodate diverse networking requirements for up to 5 meters.
Key Products for HPC
Leverage the reliability and power of 800G transceivers and interoperable high-performance cabling solutions.
T1-OSFP-NDR-800G-SR8
The T1-OSFP-800G-SR8 is an 800Gb/s OSFP 800 SR8 optical module designed for 100m optical communication applications. The module converts 8 channels of 100Gb/s (PAM4) electrical input data to 8 channels of parallel optical signals, each capable of 100Gb/s operation for an aggregate data rate of 800Gbps.
On the receiver side, the module converts 8 channels of parallel optical signals of 100Gbps each channel for an aggregate data rate of 800Gbps into 8 channels of 100Gbps (PAM4) electrical output data.
An optical fiber cable with a dual MPO-12 connector can be plugged into the OSFP 800G SR8 module receptacle. Host FEC is required to support up to 100m fiber transmission.
Features
- Up to 106 Gbps data rate per channel by PAM4 modulation
- Support 800GAUI-8 electrical interface
- Integrated 850nm VCSEL array and PD array
- DDM function implemented
- Hot-pluggable
- 800Gb/s, 2x400Gb/s, 2xMPO-12
- Single +3.3V power supply
T1-OSFP-NDR-800G-DR8
The T1-OSFP-NDR-800G-DR8 is an 800Gbps OSFP 800 DR8 optical module designed for 500m optical communication applications. The module converts 8 channels of 100Gb/s (PAM4) electrical input data to 8 channels of parallel optical signals, each capable of 100Gbps operation for an aggregate data rate of 800Gbps.
On the receiver side, the module converts 8 channels of parallel optical signals of 100Gb/s each channel for an aggregate data rate of 800Gbps into 8 channels of 100Gb/s (PAM4) electrical output data. An optical fiber cable with dual MPO-12 connector can be plugged into the OSFP 800G SR8 module receptacle.
Features
- Up to 106 Gbps data rate per channel by PAM4 modulation
- Support 800GAUI-8 electrical interface
- Integrated 1310nm EML Laser
- DDM function implemented
- Hot-pluggable
- 800Gb/s, 2x400Gb/s, 2xMPO-12
- Single +3.3V power supply
Standards
- Compliant with IEEE 802.3cu-2021:
- 8x100GBASE-DR optical interface
- Compliant with IEEE P802.3ck D3.0: 8x100G AUI-1 C2M electrical interface
- Compliant with InfiniBand NDR
- Compliant with OSFP MSA HW Rev 4.1 Type 3 housing with Dual MPO-12 connector
- Compliant with CMIS Rev 5.0
- Case operating temperature 0°C to 70°C
- Two-wire serial Interface with digital diagnostic monitoring
- Complies with EU Directive 2011/65/EU (RoHS compliant)
- Class 1 Laser
T1-OSFP-NDR-400G-DR4
The module converts 4 channels of 100Gbps (PAM4) electrical input data to 4 channels of parallel optical signals, each capable of 100Gbps operation for an aggregate data rate of 400Gbps.
On the receiver side, the module converts four 100Gbps channels of parallel optical signals for an aggregate data rate of 400Gbps into four channels of 100Gbps(PAM4) electrical output data. An optical fiber cable with MPO-12 connector can be plugged into the OSFP 400G SR4 module receptacle.
Features
- Up to 106 Gbps data rate per channel by PAM4 modulation
- Support 400GAUI-8 electrical interface
- Integrated 1310nm EML Laser
- DDM function implemented
- Hot-pluggable
- 400Gb/s, MPO-12
- Single +3.3V power supply
T1-OSFP-NDR-400G-SR4
The T1-OSFP-NDR-400G-SR4 is a 400Gbps OSFP optical module designed for 50-meter optical communication applications. The module converts 4 channels of 100Gb/s (PAM4) electrical input data to 4 channels of parallel optical signals, each capable of 100Gbps operation for an aggregate data rate of 400Gbps.
On the receiver side, the module converts four 100Gbps channels of parallel optical signals for an aggregate data rate of 400Gbps into four channels of 100Gbps(PAM4) electrical output data.
An MPO-12 optical fiber cable can be plugged into the OSFP 400G SR4 module receptacle. Host FEC is required to support up to 50m fiber transmission.
Features
- Up to 106 Gbps data rate per channel by PAM4 modulation
- Support 400GAUI-4 electrical interface
- Integrated 850nm VCSEL array and PD array
- DDM function implemented
- Hot-pluggable
- Single +3.3V power supply
T1-QSFP-DD-400G-DR4
The T1-QSFP-DD-400G-DR4 is a 400Gb/s Quad Small Form Factor Pluggable-double density (QSFP-DD) optical module designed for 500m optical communication applications. The module converts 8 channels of 50Gb/s (PAM4) electrical input data to 4 channels of parallel optical signals, each capable of 100Gb/s operation for an aggregate data rate of 400Gb/s. Reversely, on the receiver side, the module converts 4 channels of parallel optical signals of 100Gb/s each channel for an aggregate data rate of 400Gb/s into 8 channels of 50Gb/s (PAM4) electrical output data.
An optical fiber cable with an MTP/MPO-12 connector can be plugged into the QSFP-DD DR4 module receptacle. Proper alignment is ensured by the guide pins inside the receptacle. The cable usually cannot be twisted for proper channel-to-channel alignment. Electrical connection is achieved through a QSFP-DD MSA-compliant edge-type connector.
The product is designed with form factor, optical/electrical connection, digital diagnostic interface according to the QSFP-DD Multi-Source Agreement (MSA) Type 2, and to meet the harshest external operating conditions including temperature, humidity, and EMI interference.
Features:
- QSFP-DD MSA compliant
- Parallel 4 optical lanes
- Compliant to IEEE 802.3bs Specficiation
- Up to 500m transmission on single mode fiber (SMF) with FEC
- Operating case temperature: 0 to 70°C
- 8×53.125Gb/s electrical interface (400GAUI-8)
- Data Rate 106.25Gbps (PAM4) per channel
- Maximum power consumption 12W
- MPO-12 connector
- RoHS compliant
T1-QSFP-DD-400G-DR4+
The T1-QSFP-DD-400G-DR4+ is a 400Gb/s Quad Small Form Factor Pluggable-double density (QSFP-DD) optical module designed for 2km optical communication applications. The module converts 8 channels of 50Gb/s (PAM4) electrical input data to 4 channels of parallel optical signals, each capable of 100Gb/s operation for an aggregate data rate of 400Gb/s. Reversely, on the receiver side, the module converts 4 channels of parallel optical signals of 100Gb/s each channel for an aggregate data rate of 400Gb/s into 8 channels of 50Gb/s (PAM4) electrical output data.
An optical fiber cable with an MTP/MPO-12 connector can be plugged into the QSFP-DD DR4+ module receptacle. Proper alignment is ensured by the guide pins inside the receptacle. The cable usually cannot be twisted for proper channel-to-channel alignment. Electrical connection is achieved through a QSFP-DD MSA-compliant edge-type connector. The product is designed with form factor, optical/electrical connection, digital diagnostic interface according to the QSFP-DD Multi-Source Agreement (MSA) Type 2, and to meet the harshest external operating conditions including temperature, humidity, and EMI interference.
Features:
- QSFP-DD MSA compliant
- Parallel 4 optical lanes
- Compliant to IEEE 802.3bs Specficiation
- Up to 2km transmission on single mode fiber (SMF) with FEC
- Operating case temperature: 0 to 70°C
- 8×53.125Gb/s electrical interface (400GAUI-8)
- Data Rate 106.25Gbps (PAM4) per channel
- Maximum power consumption 12W
- MPO-12 connector
- RoHS compliant
T1-QSFP-DD-400G-FR4
The T1-QSFP-DD-400G-FR4 is a 400Gb/s Quad Small Form Factor Pluggable-double density (QSFP-DD) optical module designed for 2km optical communication applications. The module converts 8 channels of 50Gb/s (PAM4) electrical input data to 4 channels of CWDM optical signals and multiplexes them into a single channel for 400Gb/s optical transmission. Reversely, on the receiver side, the module optically de-multiplexes a 400Gb/s optical input into 4 channels of CWDM optical signals and converts them to 8 channels of 50Gb/s (PAM4) electrical output data.
The central wavelengths of the 4 CWDM channels are 1271, 1291, 1311, and 1331 nm as members of the CWDM wavelength grid defined in ITU-T G.694.2. It contains a duplex LC connector for the optical interface and a 76-pin connector for the electrical interface. To minimize the optical dispersion in the long-haul system, single-mode fiber (SMF) has to be applied in this module. Host FEC is required to support up to 2km fiber transmission.
The product is designed with form factor, optical/electrical connection, digital diagnostic interface according to the QSFP-DD Multi-Source Agreement (MSA) Type 2, and to meet the harshest external operating conditions including temperature, humidity, and EMI interference.
Features:
- Compliant with 400G-FR4 Technical Specification rev 2.0 (100G Lambda MSA) and 400GBASE-FR4(IEEE802.3cu)
- Compliant with IEEE 802.3bs standard: 400GAUI-8 electrical interface
- Compliant with QSFP-DD MSA HW Rev 5.0
- Type 2 housing with duplex LC connector
- Compliant with QSFP-DD CMIS Rev 4.0
- Maximum power consumption 12 W
- Case operating temperature 0°C to 70°C
- Two-wire serial Interface with digital diagnostic monitoring
- Complies with EU Directive 2011/65/EU (RoHS compliant)
- Class 1 Laser
T1-QSFP-DD-400G-LR4
The T1-QSFP-DD-400G-FR4 is a 400Gb/s Quad Small Form Factor Pluggable-double density (QSFP-DD) optical module designed for 2km optical communication applications. The module converts 8 channels of 50Gb/s (PAM4) electrical input data to 4 channels of CWDM optical signals and multiplexes them into a single channel for 400Gb/s optical transmission.
Reversely, on the receiver side, the module optically de-multiplexes a 400Gb/s optical input into 4 channels of CWDM optical signals and converts them to 8 channels of 50Gb/s (PAM4) electrical output data. The central wavelengths of the 4 CWDM channels are 1271, 1291, 1311, and 1331 nm as members of the CWDM wavelength grid defined in ITU-T G.694.2.
It contains a duplex LC connector for the optical interface and a 76-pin connector for the electrical interface. To minimize the optical dispersion in the long-haul system, single-mode fiber (SMF) has to be applied in this module. Host FEC is required to support up to 2km fiber transmission.
The product is designed with form factor, optical/electrical connection, digital diagnostic interface according to the QSFP-DD Multi-Source Agreement (MSA) Type 2, and to meet the harshest external operating conditions including temperature, humidity, and EMI interference.
Features:
- QSFP-DD MSA compliant
- 4 CWDM lanes MUX/DEMUX design
- 100G Lambda MSA 100G-LR Specification compliant
- Up to 10km transmission on single mode fiber (SMF) with FEC
- Operating case temperature: 0 to 70°C
- 8×53.125Gb/s electrical interface (400GAUI-8)
- Data Rate 106.25Gbps (PAM4) per channel
- Maximum power consumption 12W
- Duplex LC connector
- RoHS compliant
T1-QSFP-DD-400G-SR-BD
The T1-QSFP-DD-400G-SR4-BD is a 400Gb/s Quad Small Form Factor Pluggable-double density (QSFP-DD) optical module that can support 400Gb/s bit rates. It is a parallel Quad Small Form-factor Pluggable—double density (QSFP-DD) Bi-Direction optical module. The module accepts eight host electrical data and transmits them in two groups of optical bi-directional lanes (each group contains 4 pairs of optical lanes) to allow optical communication over optical multi-mode fibers. Reversely, on the receiver side, the module accepts 8 sets of optical input signals and converts them to 8 channels of electrical data.
An optical fiber with an MPO-12 connector can be plugged into the QSFP-DD module receptacle. Proper alignment is ensured by the guide pins inside the receptacle. The cable usually cannot be twisted for proper channel-to-channel alignment. Electrical connection is achieved through an MSA- compliant 76-pin edge-type connector.
The module operates by a single +3.3V power supply. LVCMOS/LVTTL global control signals, such as Module Present, Reset, Interrupt, and Low Power Mode, are available with the modules. A 2-wire serial interface is available to send and receive more complex control signals, and to receive digital diagnostic information. Individual channels can be addressed and unused channels can be shut down for maximum design flexibility.
The product is designed with form factor, optical/electrical connection, digital diagnostic interface according to the QSFP28 Multi-Source Agreement (MSA), and to meet the harshest external operating conditions including temperature, humidity, and EMI interference. The module offers very high functionality and feature integration, accessible via a two-wire serial interface.
The central wavelengths of the 4 CWDM channels are 1271, 1291, 1311 and 1331 nm as members of the CWDM wavelength grid defined in ITU-T G.694.2. It contains a duplex LC connector for the optical interface and a 76-pin connector for the electrical interface. To minimize the optical dispersion in the long-haul system, single-mode fiber (SMF) has to be applied in this module. Host FEC is required to support up to 2km fiber transmission
The product is designed with form factor, optical/electrical connection and digital diagnostic interface according to the QSFP-DD Multi-Source Agreement (MSA) Type 2. It has been designed to meet the harshest external operating conditions including temperature, humidity and EMI interference.
Features:
- QSFP-DD MSA compliant
- 8×53.125Gb/s electrical interface (400GAUI-8)
- Up to 150m OM5 MMF transmission
- Operating case temperature 0°C to 70°C
- Single 3.3V power supply
- Maximum power consumption 12W
- MPO-12 optical connector
- RoHS-6 compliant
T1-QSFP-DD-400G-SR8
The T1-QSFP-DD-400G-SR8 is a parallel 400Gb/s Quad Small Form Factor Pluggable–double density (QSFP-DD) optical module that provides increased port density and total system cost savings. The QSFP-DD full-duplex optical module offers 8 independent transmit and receive channels, each capable of 53.125Gb/s operation for an aggregate data rate of 400Gb/s on 100 meters of OM3 multi-mode fiber.
An optical fiber cable with an MTP/MPO-16 connector can be plugged into the QSFP-DD SR8 module receptacle. Proper alignment is ensured by the guide pins inside the receptacle. The cable usually cannot be twisted for proper channel-to-channel alignment. Electrical connection is achieved through a QSFP-DD MSA-compliant edge-type connector. The central wavelengths of all 8 parallel lanes are 850nm.
It contains an optical MPO-16 connector for the optical interface and a 60-pin connector for the electrical interface. Host FEC is required to support up to 70m OM3 multi-mode fiber transmission. The product is designed with form factor, optical/electrical connection, digital diagnostic interface according to the QSFP-DD Multi-Source Agreement (MSA) Type 2, and to meet the harshest external operating conditions including temperature, humidity, and EMI interference.
Features:
- QSFP-DD MSA compliant
- 8 parallel lanes one 850nm center wavelength
- Compliant to IEEE 802.3bs Specficiation
- Up to 70m transmission on multi-mode fiber (MMF) OM3 with FEC
- Operating case temperature: 20 to 60°C
- 8×53.125Gb/s electrical interface (400GAUI-8)
- Data Rate 53.125Gbps (PAM4) per channel
- Maximum power consumption 10W
- MPO-16 connector
- RoHS compliant
T1-QSFP-DD-4X100G-LR
The T1-QSFP-DD-4X100G-LR is a 400Gb/s Quad Small Form Factor Pluggable-double density (QSFP-DD) optical module designed for 10km optical communication applications. The module converts 8 channels of 50Gb/s (PAM4) electrical input data to 4 channels of parallel optical signals, each capable of 100Gb/s operation for an aggregate data rate of 400Gb/s. Reversely, on the receiver side, the module converts 4 channels of parallel optical signals of 100Gb/s each channel for an aggregate data rate of 400Gb/s into 8 channels of 50Gb/s (PAM4) electrical output data.
An optical fiber cable with an MTP/MPO-12 connector can be plugged into the module receptacle. Proper alignment is ensured by the guide pins inside the receptacle. The cable usually cannot be twisted for proper channel-to-channel alignment. Electrical connection is achieved through a QSFP-DD MSA-compliant edge-type connector.
The product is designed with form factor, optical/electrical connection, digital diagnostic interface according to the QSFP-DD Multi-Source Agreement (MSA) Type 2. It has been designed to meet the harshest external operating conditions including temperature, humidity, and EMI interference.
Features:
- QSFP-DD MSA compliant
- 4 CWDM lanes MUX/DEMUX design
- 100G Lambda MSA 100G-LR Specification compliant
- Up to 10km transmission on single mode fiber (SMF) with FEC
- Operating case temperature: 0 to 70°C
- 8×53.125Gb/s electrical interface (400GAUI-8)
- Data Rate 106.25Gbps (PAM4) per channel
- Maximum power consumption 12W
- MPO-12 connector
- RoHS compliant
Active Optical Cables
OSFP 800G AOC is a high-speed optical data transmission cable assembly designed to deliver 800Gbps data rates. As an OSFP (Octal Small Form Factor Pluggable) form factor cable, it meets the compact and high-density standard for optical transceivers and cables.
OSFP AOC cables integrate active optical components, such as lasers and photodetectors, within the cable connectors to facilitate rapid and reliable data transmission over short to medium distances.
Commonly used in data center environments, OSFP cables support high-performance computing clusters, offering flexibility, low latency, and high bandwidth to support the demands of modern networking applications.
Direct Attach Cables
OSFP 800G DAC delivers high-speed, cost-effective interconnection technology meticulously engineered for ultra-rapid data transmission 800Gbps. OSFP 800G DAC meets OSFP (Octal Small Form Factor Pluggable) form factor standards and is distinguished by the use of copper conductors which are optimized for short-range connections within the densely populated and demanding environments of data centers.
Renowned for its reliability and energy efficiency, the OSFP 800G DAC cable provides seamless compatibility with a diverse range of networking equipment and caters to
applications by providing swift and uninterrupted data transfer for up to 3 meters.
Active Copper Cables
OSFP 800G ACC is a cutting-edge interconnection solution engineered to facilitate high-speed data transmission at 800Gbps. It meets the OSFP (Octal Small Form Factor Pluggable) form factor standard, harnessing the capabilities of active copper conductors specially optimized for short-range connections within the intricate infrastructure of data centers.
OSFP 800G ACC is configured with OSFP and available in a range of length options longer than DAC to accommodate diverse networking requirements for up to 5 meters.
Key Products for HPC
Leverage the reliability and power of 800G transceivers and interoperable high-performance cabling solutions.
800G OPTICAL TRANSCEIVERS
T1-OSFP-NDR-800G-SR8
The T1-OSFP-800G-SR8 is an 800Gb/s OSFP 800 SR8 optical module designed for 100m optical communication applications. The module converts 8 channels of 100Gb/s (PAM4) electrical input data to 8 channels of parallel optical signals, each capable of 100Gb/s operation for an aggregate data rate of 800Gbps.
On the receiver side, the module converts 8 channels of parallel optical signals of 100Gbps each channel for an aggregate data rate of 800Gbps into 8 channels of 100Gbps (PAM4) electrical output data.
An optical fiber cable with a dual MPO-12 connector can be plugged into the OSFP 800G SR8 module receptacle. Host FEC is required to support up to 100m fiber transmission.
Features
- Up to 106 Gbps data rate per channel by PAM4 modulation
- Support 800GAUI-8 electrical interface
- Integrated 850nm VCSEL array and PD array
- DDM function implemented
- Hot-pluggable
- 800Gb/s, 2x400Gb/s, 2xMPO-12
- Single +3.3V power supply
T1-OSFP-NDR-800G-DR8
The T1-OSFP-NDR-800G-DR8 is an 800Gbps OSFP 800 DR8 optical module designed for 500m optical communication applications. The module converts 8 channels of 100Gb/s (PAM4) electrical input data to 8 channels of parallel optical signals, each capable of 100Gbps operation for an aggregate data rate of 800Gbps.
On the receiver side, the module converts 8 channels of parallel optical signals of 100Gb/s each channel for an aggregate data rate of 800Gbps into 8 channels of 100Gb/s (PAM4) electrical output data. An optical fiber cable with dual MPO-12 connector can be plugged into the OSFP 800G SR8 module receptacle.
Features
- Up to 106 Gbps data rate per channel by PAM4 modulation
- Support 800GAUI-8 electrical interface
- Integrated 1310nm EML Laser
- DDM function implemented
- Hot-pluggable
- 800Gb/s, 2x400Gb/s, 2xMPO-12
- Single +3.3V power supply
Standards
- Compliant with IEEE 802.3cu-2021:
- 8x100GBASE-DR optical interface
- Compliant with IEEE P802.3ck D3.0: 8x100G AUI-1 C2M electrical interface
- Compliant with InfiniBand NDR
- Compliant with OSFP MSA HW Rev 4.1 Type 3 housing with Dual MPO-12 connector
- Compliant with CMIS Rev 5.0
- Case operating temperature 0°C to 70°C
- Two-wire serial Interface with digital diagnostic monitoring
- Complies with EU Directive 2011/65/EU (RoHS compliant)
- Class 1 Laser
T1-QSFP-800G-DD
TBA
400G OPTICAL TRANSCEIVERS
T1-OSFP-NDR-400G-DR4
TBA
T1-OSFP-NDR-400G-SR4
TBA
T1-OSFP-NDR-800G-DR8
TBA
T1-OSFP-NDR-800G-SR8
TBA
CABLE SOLUTIONS
Active Optical Cables
OSFP 800G AOC is a high-speed optical data transmission cable assembly designed to deliver 800Gbps data rates. As an OSFP (Octal Small Form Factor Pluggable) form factor cable, it meets the compact and high-density standard for optical transceivers and cables.
OSFP AOC cables integrate active optical components, such as lasers and photodetectors, within the cable connectors to facilitate rapid and reliable data transmission over short to medium distances.
Commonly used in data center environments, OSFP cables support high-performance computing clusters, offering flexibility, low latency, and high bandwidth to support the demands of modern networking applications.
Direct Attach Cables
OSFP 800G DAC delivers high-speed, cost-effective interconnection technology meticulously engineered for ultra-rapid data transmission 800Gbps. OSFP 800G DAC meets OSFP (Octal Small Form Factor Pluggable) form factor standards and is distinguished by the use of copper conductors which are optimized for short-range connections within the densely populated and demanding environments of data centers.
Renowned for its reliability and energy efficiency, the OSFP 800G DAC cable provides seamless compatibility with a diverse range of networking equipment and caters to
applications by providing swift and uninterrupted data transfer for up to 2.5 meters.
Active Copper Cables
OSFP 800G ACC is a cutting-edge interconnection solution engineered to facilitate high-speed data transmission at 800Gbps. It meets the OSFP (Octal Small Form Factor Pluggable) form factor standard, harnessing the capabilities of active copper conductors specially optimized for short-range connections within the intricate infrastructure of data centers.
OSFP 800G ACC is configured with OSFP and available in a range of length options longer than DAC to accommodate diverse networking requirements for up to 5 meters.
Key Products for HPC
Leverage the reliability and power of 800G transceivers and interoperable high-performance cabling solutions.
OPTICAL TRANSCEIVERS
T1-OSFP-NDR-800G-SR8
The T1-OSFP-800G-SR8 is an 800Gb/s OSFP 800 SR8 optical module designed for 100m optical communication applications. The module converts 8 channels of 100Gb/s (PAM4) electrical input data to 8 channels of parallel optical signals, each capable of 100Gb/s operation for an aggregate data rate of 800Gbps.
On the receiver side, the module converts 8 channels of parallel optical signals of 100Gbps each channel for an aggregate data rate of 800Gbps into 8 channels of 100Gbps (PAM4) electrical output data.
An optical fiber cable with a dual MPO-12 connector can be plugged into the OSFP 800G SR8 module receptacle. Host FEC is required to support up to 100m fiber transmission.
Features
- Up to 106 Gbps data rate per channel by PAM4 modulation
- Support 800GAUI-8 electrical interface
- Integrated 850nm VCSEL array and PD array
- DDM function implemented
- Hot-pluggable
- 800Gb/s, 2x400Gb/s, 2xMPO-12
- Single +3.3V power supply
T1-OSFP-NDR-800G-DR8
The T1-OSFP-NDR-800G-DR8 is an 800Gbps OSFP 800 DR8 optical module designed for 500m optical communication applications. The module converts 8 channels of 100Gb/s (PAM4) electrical input data to 8 channels of parallel optical signals, each capable of 100Gbps operation for an aggregate data rate of 800Gbps.
On the receiver side, the module converts 8 channels of parallel optical signals of 100Gb/s each channel for an aggregate data rate of 800Gbps into 8 channels of 100Gb/s (PAM4) electrical output data. An optical fiber cable with dual MPO-12 connector can be plugged into the OSFP 800G SR8 module receptacle.
Features
- Up to 106 Gbps data rate per channel by PAM4 modulation
- Support 800GAUI-8 electrical interface
- Integrated 1310nm EML Laser
- DDM function implemented
- Hot-pluggable
- 800Gb/s, 2x400Gb/s, 2xMPO-12
- Single +3.3V power supply
Standards
- Compliant with IEEE 802.3cu-2021:
- 8x100GBASE-DR optical interface
- Compliant with IEEE P802.3ck D3.0: 8x100G AUI-1 C2M electrical interface
- Compliant with InfiniBand NDR
- Compliant with OSFP MSA HW Rev 4.1 Type 3 housing with Dual MPO-12 connector
- Compliant with CMIS Rev 5.0
- Case operating temperature 0°C to 70°C
- Two-wire serial Interface with digital diagnostic monitoring
- Complies with EU Directive 2011/65/EU (RoHS compliant)
- Class 1 Laser
CABLE SOLUTIONS
Active Optical Cables
OSFP 800G AOC is a high-speed optical data transmission cable assembly designed to deliver 800Gbps data rates. As an OSFP (Octal Small Form Factor Pluggable) form factor cable, it meets the compact and high-density standard for optical transceivers and cables.
OSFP AOC cables integrate active optical components, such as lasers and photodetectors, within the cable connectors to facilitate rapid and reliable data transmission over short to medium distances.
Commonly used in data center environments, OSFP cables support high-performance computing clusters, offering flexibility, low latency, and high bandwidth to support the demands of modern networking applications.
Direct Attach Cables
OSFP 800G DAC delivers high-speed, cost-effective interconnection technology meticulously engineered for ultra-rapid data transmission 800Gbps. OSFP 800G DAC meets OSFP (Octal Small Form Factor Pluggable) form factor standards and is distinguished by the use of copper conductors which are optimized for short-range connections within the densely populated and demanding environments of data centers.
Renowned for its reliability and energy efficiency, the OSFP 800G DAC cable provides seamless compatibility with a diverse range of networking equipment and caters to
applications by providing swift and uninterrupted data transfer for up to 2.5 meters.
Active Copper Cables
OSFP 800G ACC is a cutting-edge interconnection solution engineered to facilitate high-speed data transmission at 800Gbps. It meets the OSFP (Octal Small Form Factor Pluggable) form factor standard, harnessing the capabilities of active copper conductors specially optimized for short-range connections within the intricate infrastructure of data centers.
OSFP 800G ACC is configured with OSFP and available in a range of length options longer than DAC to accommodate diverse networking requirements for up to 5 meters.
Transition to 800G With Ease
Product Availability
Where lead times from other manufacturers are delayed by between four to six months, we’ve delivered fully operational hardware to large data centers within four to 12 weeks.
Ready for Installation
All transceivers shipped are programmed to meet your unique environment needs. You’ll be able to plug in and start leveraging the power of 800G without teething problems or the headache of programming any devices.
Reliable Support
Customers rely on our engineering team for hands-on, specialized technical support. We’ve built our reputation as the industry's most reliable integration specialists by establishing an accessible and ready-to-help approach to client support.
Interoperable Solutions
Enjoy interoperability between your existing infrastructure and new 800G components for an affordable solution and lower operational complexity.
A Trusted Partner
Our guided approach to delivering solutions makes us a valuable partner. We’re always a call away and ready to answer any questions and assistance, saving you the hassle and time of working with several providers.
