T1-QSFP-40/100G-SR-BD

  • Compliant to the 40/100GbE XLPPI electrical specification per IEEE 802.3bm
  • Compliant to QSFP28 SFF-8436 Specification
  • Aggregate bandwidth of > 100Gbps
  • Dual wavelength VCSEL bi-directional optical interface, NRZ 2x20G or PAM4 2 × 50-Gbps 850/900 nm
  • Capable of over 70m transmission on OM3 Multimode Fiber (MMF)and 100m on OM4 MMF
  • Single +3.3V power supply operating
  • Without digital diagnostic functions
  • Temperature range 0°C to 70°C
  • RoHS Compliant Part
  • Utilizes a standard LC duplex fiber cable allowing reuse of existing cable infrastructure
Applications

40/100 Gigabit Ethernet interconnects

,

Data aggregation and backplane applications

,

Datacom/Telecom switch & router connections

,

Proprietary protocol and density applications

Ordering Information

Part number: T1-QSFP-40/100G-SR-BD

Overview

T1-QSFP-40/100G-SR-BD is a four-channel, pluggable, LC Duplex, fiber-optic QSFP+ transceiver for 40/100 Gigabit Ethernet applications. It is a high-performance module for short-range duplex data communication and interconnect applications. T1-QSFP-40/100G-SR-BD integrates four electrical data lanes in each direction into transmission over a single LC duplex fiber optic cable. Each electrical lane operates at 10.3125/25.78125 Gbps and conforms to the 40/100GE XLPPI interface.

The transceiver internally multiplexes an XLPPI 4×10/25G interface into two 20/50Gbps electrical channels, transmitting and receiving each optically over one simplex LC fiber using bi-directional optics. This results in an aggregate bandwidth of 40/100Gbps into a duplex LC cable, allowing reuse of the installed LC duplex cabling infrastructure for 40/100GbE application. 

It supports distances up to 70 m using OM3 and 100m using OM4 optical fiber are supported and is designed to operate over multimode fiber systems using a nominal wavelength of 850nm on one end and 900nm on the other end. The electrical interface uses a 38-contact QSFP28-type edge connector and the optical interface uses a conventional LC duplex connector.

Specifications

Get the T1-QSFP-40/100G-SR-BD specifications sheet including the following characteristics:

Regulatory Compliance General Specifications
Optical Characteristic – Transmitter Optical Characteristics – Receiver
Electrical Characteristics Electrical Characteristics – Transmitter
Electrical Characteristics – Receiver Block Diagram of Transceiver
Mechanical Dimensions Electrical Pad Layout
Pin Assignment Recommended Circuit

REQUEST SPECIFICATIONS SHEET

Quality Certification

QUALITY & WARRANTY

ISO and TL9000 Quality with a Lifetime Warranty

We are proud to offer industry-leading products that meet ISO and TL9000 standards and are backed by a lifetime warranty.

lifetime-warranty
iso-logo
T1-Logo-TL900 Warranty